Coleman cooler fix

[EagleAce]

Well I WISH I had a tripac! This company didn't install 'em on all its trucks ! Otherwise I'd have it all in here!

in the meantime I just idle when I need a/c or electricty......

[RSTrans]

I got lucky with my Tripak, the guy who had the truck before me spent the 10K to buy it and it just came with my rig. Since I pay for the fuel I try not to idle more than I have to. Only idle time is warm up and cool down so my idle time is like 3% or so. But since I am going to be pulling an end dump and a landoll thats gonna be the end of that.

[EagleAce]

The truth is I hate idling just as much as the company; I see it as a necessary evil- I rarely run it all night, but I will if I need to and the company knows it.

[rollforever]

i just changed mine over and it works way better. i might even change the little fan on the inside. it even makes for good white noise while i'm sleeping.

[SyPTo]

OUTSIDE

92x92x25mm

INSIDE

60x60x10mm

Those are the dimensions for the fan replacements in the cooler , one note though , DO NOT get a fan for the inside that blows more then 20cfm , i have replaced the inside fan once with a high speed / high flow fan and everything in the cooler will freeze , good if you want a freezer , not so good for drinks , sandwich meats etc...lol

i actually changed the wires in the cooler and they now have a male/female plug , and i carry 1 fan extra with me in the truck , so i can quickly change them when i need to and don't have to solder the wires ,
Also if you use above fans you can use all the original guards and plastics.

For the outside fan get one that blows atleast 40 CFM , mine are 48 cfm / high speed fans.

i use amazon for mine , but you can google "case fans" and they will pop up , prices are anywhere from a few bucks to 20 bucks a pop , i look for either 2 ball bearings or a fluid bearing , those fans are a bit more , but they last soo much longer and are not prone to dust as much as the fans with sleeve bearings.

[Pipeman]

and what is THAT supposed to mean?

Not bad...EA...Not bad....Means that it's good. (for a girlie)